Dear Sirs, Kindly forward your best proposal for the following item on or before 27th May 2005. Pressure transmitter Qty: 5 off Pressure Transmitter : The Transmitter should be of all stainless steel wetted Parts, CVD Construction for High Stability-Proof Zero Span Adjustments. Specifications: Excitation: 24 Vdc, (12-36 Vdc) with reverse polarity protected. Output: 4-20 mA (2 Wire) Accuracy: 0.15% (Including linearity, Hystersis & Repeatability). Zero Balance: 0.03 mA Span Tolerance: 16 ¡À 0.03 mA Max. Loop Resistance: 50 X (Supply Voltage ¨C 12) Ohms. Operating Temp. : -30 to 1200 C Compensated Temp. : -20 to 800 C. Thermal Effects: 1.2% FS over (-20 to 800 C) Operating Pressure: 0 to 30 bar Abs. Proof Pressure: 150% Burst Pressure: 400% Zero and Span Adj.: 10% FS. Response Time: 1 ms Gage Type: Chemical vapour deposited polysilicon strain gages Wetted Parts: Stainless Steel compatible with Hydrazine Pressure Port: ¼ -18 NPT Electrical Connections: Standard Connector Weight: <300 grams Note: Calibration Certificates with Technical Manual has to be provided Thanks and best regards, Thanassis Andreou Aeoliki Marine Ltd Tel 01707 329 000 Fax 01707 696 254