Dear Sirs, We are currently looking for a new battery pack to replace our NiCad battery pack that we use in one of our products. I have attached a drawing with information on the old NiCad battery pack for information. The pack consists of 10 x 'C' size cells arranged as per the drawing and with solder tags. We need the same arrangement but this time using NiMH cells which must be UL recognised. The capacity is to be 2.5Ah although we could accept higher e.g. 2.6Ah or 2.8Ah if necessary. There is no special requirement to fast charge. Please let me know if you are able to supply a battery pack to the above requirements or if not are you able to recommend a manufacturer and or distributor or assembler who could supply this battery pack to us. The quantities to quote for are for 250, 500 and 1000 units. I look forward to hearing from you as soon as possible. Regards Clive Mash Purchasing Manager No Climb Products Ltd Edison House 163 Dixons Hill Road Welham Green Hertfordshire AL9 7JE United Kingdom Tel: +44 (0) 1707 282770 • Fax: +44 (0) 1707 282777 www.detectortesters.com IMPORTANT – This email and any attachments may be confidential. Any retransmissions, dissemination or other use of these materials by persons or entities other than the intended recipient is prohibited. If received in error, please contact us and delete all copies. Before opening or using attachments, check them for viruses and defects. Our liability is limited to re-supplying any affected attachments. Any representations or opinions expressed in this email are those of the individual sender, and not necessarily those of No Climb Products Limited. Fax: +44 (0)1707 282777